 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
Three-pass, vertical tube water heater with medium capacity storage and medium- to-high recovery capacity.
MODBUS connectable operating control.
Less than 20 ppm NOx available on most models.
Smaller footprint compared to boiler/sidearm tank systems.
Featuring a tank and heating surfaces constructed entirely of AquaPLEX, a high-chromium duplex material that requires no lining. Naturally impervious to water corrosion and provides superior resistance to chloride stress corrosion cracking compared to 316L stainless steel. ASME approved material.
- Efficiency
- Inputs / Storage
- Burner / Venting
- Certifications
- Corrosion Protection
- Warranties
- Literature
84% thermal efficiency per ANSI Z21.10.3 testing
Heaters qualify for LEED certification.
Heaters qualify for LEED certification.
125 gallon series: 399 - 500 - 750 - 900 - 1000 MBtu
250 gallon series: 500 - 750 - 900 - 1000 - 1500 - 1800 - 2000 MBtu
300 gallon series: 500 - 750 - 900 - 1000 - 1500 - 1800 - 2000 MBtu
250 gallon series: 500 - 750 - 900 - 1000 - 1500 - 1800 - 2000 MBtu
300 gallon series: 500 - 750 - 900 - 1000 - 1500 - 1800 - 2000 MBtu
Natural gas or LP gas.
Premix surface burners (less than 20 ppm NOx on most models)
Gas trains are UL compliant and include a second safety shutoff valve and gas pressure regulator.
Category I, negative pressure venting.
Factory equipped for connection to direct combustion air.
Gas trains are UL compliant and include a second safety shutoff valve and gas pressure regulator.
Category I, negative pressure venting.
Factory equipped for connection to direct combustion air.
ETL listed to US and Canadian safety standards.
FM compliant.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
FM compliant.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
AquaPLEX duplex tank material requires no lining.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
Standard tank warranty is 10 years.
Tank warranties include failure due to scale buildup.
Additional 10-year, non-prorated coverage for failure due to chloride-induced stress corrosion cracking.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.
Tank warranties include failure due to scale buildup.
Additional 10-year, non-prorated coverage for failure due to chloride-induced stress corrosion cracking.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.