 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
- Efficiency
- Inputs / Storage
- Burner / Venting
- Certifications
- Corrosion Protection
- Warranties
- Literature
Up to 94% thermal efficiency.Meets ASHRAE 90.1-2010.
Heaters qualify for LEED certification and may contribute to additional LEED points due to efficiency.
Heaters qualify for LEED certification and may contribute to additional LEED points due to efficiency.
199 - 299 and 399 MBtu
Vertical Tanks: 70 to 80 gallons
Vertical Tanks: 70 to 80 gallons
Natural gas or LP gas.
Premix stainless steel surface burner.
Gas trains are ANSI/CSA compliant and include a second safety shutoff valve and gas pressure regulator.
Product vents positively through PVC through 4 inch material for 100 equivalent feet. High temperature applications require CPVC. For longer lengths, consult representative.
Can connect to direct combustion air with optional adapter (consult representative for vent lengths).
Premix stainless steel surface burner.
Gas trains are ANSI/CSA compliant and include a second safety shutoff valve and gas pressure regulator.
Product vents positively through PVC through 4 inch material for 100 equivalent feet. High temperature applications require CPVC. For longer lengths, consult representative.
Can connect to direct combustion air with optional adapter (consult representative for vent lengths).
ETL listed to ANSI and CSA safety standards.
FM compliant. NSF-61 compliant. SCAQMD listed at <20 ppm NOx for 199 and 299 MBH and <30 ppm NOx for 399 MBH.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
FM compliant. NSF-61 compliant. SCAQMD listed at <20 ppm NOx for 199 and 299 MBH and <30 ppm NOx for 399 MBH.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
AquaPLEX® engineered duplex alloy storage tank -or-
POLYSHIELD® polymer-lined storage tank.
Heat exchanger coated with DURASHIELD® copper and PTFE composite.
All tank connections are non-ferrous and removeable. Corrosion protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
POLYSHIELD® polymer-lined storage tank.
Heat exchanger coated with DURASHIELD® copper and PTFE composite.
All tank connections are non-ferrous and removeable. Corrosion protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
With AquaPLEX® engineered duplex alloy tank, warranty is 10 years. Warranty covers chloride stress corrosion cracking.
With POLYSHIELD® polymer-lined tank, warranty is 5 years.
Tank warranties include failure due to scale buildup.
Heat exchanger has 5 year warranty.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Information provided above is summary only. Refer to written warranties and service policies for full details.
With POLYSHIELD® polymer-lined tank, warranty is 5 years.
Tank warranties include failure due to scale buildup.
Heat exchanger has 5 year warranty.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Information provided above is summary only. Refer to written warranties and service policies for full details.