 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
Now available with an electronic operating control that is Modbus connectable to a buidling automation system.
- Recoveries
- Storage
- Steam Control
- Certifications
- Corrosion Protection
- Warranties
- Literature
Seven standard sizes from ~ 200 to ~ 3200 gph of water at a 100 degree rise with 15 psi steam entering the valve.
Recoveries will vary with inlet steam pressure and temperature rise of potable water.
Custom sizes available with the only limitation being the available sizes of u-tube exchangers and steam valves.
Recoveries will vary with inlet steam pressure and temperature rise of potable water.
Custom sizes available with the only limitation being the available sizes of u-tube exchangers and steam valves.
Vertical orientation: 150 - 175 - 225 - 250 - 300 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 - 4000 and 4500 gallons.
Horzontal orientation: 250 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 - 4000 and 4500 gallons.
Horzontal orientation: 250 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 - 4000 and 4500 gallons.
Standard control is a self-contained, pilot driven steam valve with solenoid actuator.
Optional controls include two-position steam valves with electric or pneumatic pilots and modulating valves with pneumatic pilots.
Optional controls include two-position steam valves with electric or pneumatic pilots and modulating valves with pneumatic pilots.
ETL listed as a packaged water heater.
ASME, section IV, part HLW stamped and National Board Registered.
Control panel is ETL panel shop approved.
ASME, section IV, part HLW stamped and National Board Registered.
Control panel is ETL panel shop approved.
AquaPLEX® engineered duplex alloy available on selected models.
All models available with NICKELSHIELD® nickel-plated storage tank -or- POLYSHIELD® polymer-lined storage tank.
Heat exchanger is copper or cupro-nickel
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
All models available with NICKELSHIELD® nickel-plated storage tank -or- POLYSHIELD® polymer-lined storage tank.
Heat exchanger is copper or cupro-nickel
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
With AquaPLEX® engineered duplex alloy (unlined tank), standard tank warranty is 10 years with a 20-year option.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® tanks, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® tank, standard tank warranty is 5 years with a 15-year option.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® tanks, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® tank, standard tank warranty is 5 years with a 15-year option.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.