 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
Now available with electronic operating control that is Modbus connectable to BAS.
Click on tab for more information.
- Recoveries
- Storage
- Steam Control
- Certifications
- Corrosion Protection
- Warranties
- Literature
Eight standard sizes from ~ 8 to ~ 110 gph of water at a 100 degree rise with 15 psi steam entering the valve.
Custom sizes available with the only limitation being the available sizes of u-tube exchangers and steam valves.
Custom sizes available with the only limitation being the available sizes of u-tube exchangers and steam valves.
Vertical orientation: Approximately 50 to 100 gallons depending upon model. (with a semi-instantaneous water heater, storage is a minor consideration compared to recovery capacity).
Standard control is a self-contained, two-position (on-off), pilot-driven steam valve with solenoid actuator.
Optional controls include on-off steam valves with electric or pneumatic pilots and modulating valves with pneumatic pilots.
Optional controls include on-off steam valves with electric or pneumatic pilots and modulating valves with pneumatic pilots.
ETL listed as a packaged water heater.
ASME, section IV, part HLW stamped and National Board Registered.
Control panel is ETL panel shop approved.
ASME, section IV, part HLW stamped and National Board Registered.
Control panel is ETL panel shop approved.
AquaPLEX engineered duplex alloy storage tank (unlined) -or-
NICKELSHIELD® nickel-plated storage tank -or-
POLYSHIELD® polymer-lined storage tank
Heat exchanger is copper or cupro-nickel
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
NICKELSHIELD® nickel-plated storage tank -or-
POLYSHIELD® polymer-lined storage tank
Heat exchanger is copper or cupro-nickel
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
With AquaPLEX® engineered duplex alloy (unlined tank) standard tank warranty is 10 years with a 20-year option.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® nickel-plated tank, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® polymer-lined tank, standard tank warranty is 5 years with a 15-year option.
Tank warranties include failure due to scale buildup.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® nickel-plated tank, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® polymer-lined tank, standard tank warranty is 5 years with a 15-year option.
Tank warranties include failure due to scale buildup.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.