 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
99% thermal efficiency at full firing rate.
The world's most efficient gas-fired water heater!
TURBOPOWER 99 is a fire tube, condensing storage water heater featuring dual submerged heat exchangers. This design results in four passes of combustion gases throught the water. The heat exchangers bolt to the tank and are completely removeable; providing unequalled field accessibility and maintainability of both exchangers and tank. MODBUS connectable operating control.
- Efficiency
- Inputs / Storage
- Burner / Venting
- Certifications
- Corrosion Protection
- Warranties
- Literature
99% thermal efficiency at full firing rate from 40 degrees to 140 degrees. Meets ASHRAE 90.1-2007.
Heaters qualify for LEED certification and may contribute to additional LEED points.
Heaters qualify for LEED certification and may contribute to additional LEED points.
500 - 1000 -1500 and 2000 - MBH
Vertical Tanks: 330 - 600 - 950 - 1200 gallons
Vertical Tanks: 330 - 600 - 950 - 1200 gallons
Natural gas.
High over-pressure, end shot power burner with cast aluminum housing.
Gas trains are UL compliant and include a second safety shutoff valve and gas pressure regulator.
Product vents positively through PVC for 100 equivalent feet. For longer lengths, consult representative.
Can connect to direct combustion air with optional adapter (consult representative for vent lengths).
High over-pressure, end shot power burner with cast aluminum housing.
Gas trains are UL compliant and include a second safety shutoff valve and gas pressure regulator.
Product vents positively through PVC for 100 equivalent feet. For longer lengths, consult representative.
Can connect to direct combustion air with optional adapter (consult representative for vent lengths).
ETL listed to US and Canadian safety standards.
FM compliant.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
FM compliant.
ASME, section IV, part HLW stamped and National Board Registered.
CSD-1 (GE-GAP) controls optional.
NICKELSHIELD® nickel-plated storage tank -or-
POLYSHIELD® polymer-lined storage tank
Heat exchanger coated with DURASHIELD® copper and PTFE composite.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
POLYSHIELD® polymer-lined storage tank
Heat exchanger coated with DURASHIELD® copper and PTFE composite.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
With NICKELSHIELD® nickel-plated tank, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® polymer-lined tank, standard tank warranty is 5 years with a 15-year option.
Tank warranties include failure due to scale buildup.
TURBOPOWER heating module has 5 year warranty.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.
With POLYSHIELD® polymer-lined tank, standard tank warranty is 5 years with a 15-year option.
Tank warranties include failure due to scale buildup.
TURBOPOWER heating module has 5 year warranty.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.