| TURBOPOWER GAS - a SUPERTANK® Water Heater | ||
| TURBOPOWER is a fire tube, semi-instantaneous or storage water heater featuring a two-pass, submerged heat exchanger that bolts to the tank and is completely removeable; providing unequalled field accessibility and maintainability of both the exchanger and the tank. Optional electronic operating control alloys for Modbus connectivity to BAS. |
![]() |
Available with AquaPLEX®, a fully passivated, high-chromium duplex material that requires no lining. Naturally impervious to water corrosion and provides superior resistance to chloride stress corrosion cracking compared to 316L stainless steel.
ASME approved material. ![]() |
Click tab for more information.
83% thermal efficiency. Meets ASHRAE 90.1-2007. Tanks insulated to R12.5, satisfying ASHRAE 90.1-2007.
Heaters qualify for LEED certification. 199 - 299 -399 - 500 - 600 - 800 - 1000 - 1200 - 1600 - 2000 - 2400 - 2800 or 3200 MBtu as single exchanger heaters.
Customized dual module available to double BTU output up to 6400 MBtu. Vertical orientation: 150 - 175 - 225 - 250 - 300 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 and 4000 gallons.
Horzontal orientation: 250 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 and 4000 gallons. (custom configuration, contact your PVI representative) Natural gas or LP individually.
End shot power combustion burner. Gas trains are UL compliant and include dual safety shutoff valves and gas pressure regulator. Low NOx version available click here for information. Product vents negatively through type B double-wall material. Sidewall vents with power venter assistance (supplied by others). Direct combustion air connectable through optional burner adapter (direct combustion air guidelines). ETL listed to US and Canadian safety standards.
FM compliant. ASME, section IV, part HLW stamped and National Board Registered. CSD-1 (GE-GAP) controls optional. AquaPLEX® engineered duplex alloy available on selected models.
All models available with NICKELSHIELD® nickel-plated storage tank -or- POLYSHIELD® polymer-lined storage tank. Heat exchanger coated with DURASHIELD® copper and PTFE composite. All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings. NO ANODE REQUIRED OR USED. Click on "TECHNOLOGIES" for more information. With AquaPLEX® engineered duplex alloy, standard tank warranty is 10 years with a 20-year option.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking. With NICKELSHIELD® nickel-plated tank, standard tank warranty is 10 years with a 20-year option. With POLYSHIELD® polymer-lined tank, standard tank warranty is 5 years with a 15-year option. Tank warranties include failure due to scale buildup. TURBOPOWER heating module has 5 year warranty. First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect. Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement. Information provided above is summary only. Refer to written warranties and service policies for full details. Catalog Sheets
|
||