 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
QuickDraw boiler water storage heaters utilize a single or double-wall copper u-tube bundle to provide moderate to large amounts of domestic water from boiler water. Horizontal heat exchanger orientation allows for easy removal, if necessary for maintenance or repair. Tank corrosion protection avoids the use of anode rods, which is essential when a large non-ferrous heat exchanger is immersed in the storage tank.
Now available with an electronic operating control that is Modbus connectable to a building automation system.
- Inputs
- Storage
- Boiler Water Control
- Certifications
- Corrosion Protection
- Warranties
- Literature
U-tube bundles from 4-inch to 16-inch diameter accepting boiler water temperature up to 350 degrees.
Vertical orientation: 150 - 175 - 225 - 250 - 300 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 and 4000 gallons.
Horzontal orientation: 250 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 and 4000 gallons. (horizontal cofiguration is custom, consult factory)
Horzontal orientation: 250 - 400 - 500 - 600 - 750 - 900 - 1000 - 1250 - 1500 - 1750 - 2000 - 2500 - 3000 - 3500 and 4000 gallons. (horizontal cofiguration is custom, consult factory)
Standard boiler water control is a 2-postion (on-off) 3-way boiler water valve driven by a motorized actuator.
Motor driven 2-way valves are optional as are boiler water pumps.
Actuators controlled by dual operating thermostats.
Motor driven 2-way valves are optional as are boiler water pumps.
Actuators controlled by dual operating thermostats.
ASME, section IV, part HLW stamped and National Board Registered.
Control panel is ETL panel shop approved.
Control panel is ETL panel shop approved.
AquaPLEX® engineered duplex alloy available on selected models.
All models available with NICKELSHIELD® nickel-plated storage tank -or- POLYSHIELD® polymer-lined storage tank.
Heat exchanger is copper or copper-nickel.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
All models available with NICKELSHIELD® nickel-plated storage tank -or- POLYSHIELD® polymer-lined storage tank.
Heat exchanger is copper or copper-nickel.
All tank connections are non-ferrous and removeable. Lining protection is not compromised when pipe is threaded into fittings.
NO ANODE RODS REQUIRED OR USED. Click on "TECHNOLOGIES" for more information.
With AquaPLEX® engineered duplex alloy (unlined tank), standard tank warranty is 10 years with a 20-year option.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® tanks, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® tank, standard tank warranty is 5 years with a 15-year option.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.
AquaPLEX heaters are also covered by a 10-year warranty against chloride stress corrosion cracking.
With NICKELSHIELD® tanks, standard tank warranty is 10 years with a 20-year option.
With POLYSHIELD® tank, standard tank warranty is 5 years with a 15-year option.
First-year service policy is standard. Pays for freight and labor for warranty covered fault or defect.
Long-life service policy is optional. Extends payment for freight and labor on warranty covered vessel repair or replacement.
Information provided above is summary only. Refer to written warranties and service policies for full details.